  |
|
|
|
|
ST Consulting
|
|
|
ST Software for Windows
|
|
|
|
|
The Applications below were created by Sergei Tchernenkov for your usage. All Programs have 10
FREE Trial sessions and function as full-version applications. If you would like to continue using selected application
after Trial sessions will expire, the Program will guide you on required steps to unlock software, or you can come back
to this page to purchase Unlock Code via our secured CCnow server.
If after your evaluation you would decide that this application is useless for you, simply uninstall the program through
your Windows Control Panel.
|
|
IMPORTANT NOTE: To run ST applications you need to have Microsoft Data Access Components Version 2 or higher installed on your PC. If you don't
have this application, please download it from here (click on one of the links below).
To download any ST Software
from this page, just click on the image representing selected software, then save installation file to your hard drive. When
you activate installation file, the Setup will guide you through the rest of setup process. After 10 free trial sessions the
program will ask you to register.
Perforating Gun Selector, Ver. 1.0.0
Copyright 2004, Sergei Tchernenkov
|
|
| Buy Corporate Licence from Qwerks.com |
|
| Unlimited usage for $US 300.00 |
|
A device used to perforate oil and gas wells in preparation for production is called Perforating Gun. Containing several shaped explosive charges, perforating guns are available in a range
of sizes and configurations. The diameter of the gun used is typically determined by the presence of wellbore restrictions or limitations imposed by the surface equipment. This Application does the following:
1) Recommends range of the guns manufactured by Baker Atlas, Halliburton or Schlumberger. Recommendation is based on
user-selected gun OD.
2) Analizes performances of selected by the user perforating gun based on user-input well and reservoir data
3) Creates full Gun Report in comparison to API RP43 Section 1 Edition 5
|
old price $50.00
now only $15.00
(Single User Licence)
$300.00
(Corporate Licence - unlimited Users)
|
Drill Collars Calculator, Ver. 2.1.1
Copyright 2004, Sergei Tchernenkov
The Application Unlock Code price for Single User Licence was reduced by $5.00 from previous
Version!
|
|
| Buy Corporate Licence from Qwerks.com |
|
| Unlimited usage for $US 120.00 |
|
This Application helps you to calculate required length of specified Plain or Spiral Drill Collars to obtain desired
Weight-On-Bit in deviated or vertical cased well or open hole.
The only inputs required from you are: drilling fluid SG, angle of the well, desired WOB, and selected Safety Factor
|
old price $20.00
now only $15.00
(Single User Licence)
$120.00
(Corporate Licence - unlimited Users)
|
Oilfield Abbreviations Dictionary, Ver. 2.0.0
Copyright 2004, Sergei Tchernenkov
|
|
| Buy Personal Licence from Qwerks.com |
|
| For as low as $US 15.00 |
|
Did you ever wonder, while reading operations' reports, programs, or technical literature, what one or another abbreviation
means? Of cause, even being an expert in oilfield speciality, one can't remember all abbreviations used in technical papers
and studies, or even in oilfield slang.
This Application is Oilfield Digital dictionary with about 2,000 abbreviations!
Try this and see if you might need it...
|
$15.00
(Single User Licence)
|
ST Digital Flange Rule, Ver. 1.0.0
Copyright 2004, Sergei Tchernenkov
|
|
|
ST Consulting wants to present you with new Application - "ST Digital Flange Rule", which may replace
conventional Flange Slide Rules!
There is a whole range of similar Software published at the Oil Industry websites, but we hope you would like OUR particular
application!
As it's said above, the Program is A PRESENT for
you, therefore feel free to use this application and distribute installation file among your friends and colleagues!
However, even that Program is FREE, you would need to REGISTER
your copy of application with ST Consulting. After you would use 10 trial sessions, the application will ask you to register
by sending us an e-mail message with your User Name, which is automatically generated by the Program. The will be no charges for this registration!
|
FREE
(Only REGISTRATION for Single User will be required after 10 sessions)
|
Pipe String Pressure Losses Calculator, Ver. 3.0.0
Copyright 2004, Sergei Tchernenkov
The Application Unlock Code price for Single User Licence was reduced by $30.00 from
previous Version in spite of several useful additions to the Program!
|
|
| Buy Corporate Licence from Qwerks.com |
|
| Unlimited usage for $US 120.00 |
|
This Application will calculate for you potential friction losses in the string of Drill Pipe, Tubing, Coiled Tubing
or between 2 tubular strings.
The database of most available tubulars is built-in for your tubular selection within the Program.
User has 3 options of calculation of friction losses:
1) Pressure Losses INSIDE of tubular String (Drill Pipe and Tubing - in any combination of dual tapered string)
2) Pressure Losses INSIDE of Coiled Tubing string (no tapered option is available)
3) Pressure Losses BETWEEN two (2) strings of any tubulars (no tapered option is available)
FOR REGISTERED USERS OF "PIPE STRING PRESSURE LOSSES" VERSIONS 1.0.0 THROUGH 2.0.1 (PREVIOUSLY PUBLISHED)
UPGRADE IS FREE! SUCH USERS WOULD NEED TO SEND US THEIR ORIGINAL UNLOCK CODE TO VERIFY IDENTITY.
|
old price $20.00
now only $15.00
(Single User Licence)
$120.00
(Corporate Licence - unlimited Users)
|
|
|
|
