Resume ID #:	BRIEF SUMMARY OF EXPERIENCE, QUALIFICATIONS AND SKILLS	PURCHASE RESUME via CCNow secure server
CV-2	COILED TUBING UNIT OPERATOR Work Experience from 1996 Experienced in following COIL TUBING JOBS: Sand wash          Cementing          Acidizing Gas Lift               Milling               Fishing               Drilling
CV-4	WORKOVER SPECIALIST (SUPERVISOR, TOOLPUSHER) To utilize skills and 18 years experience acquired throughout the province of Alberta & British Columbia in Canada, 6 years Internationally, in Albania , Russia & Kazakhstan in a professional and responsible manner, in the capacity of Workover & Completions  Well Site Supervisor / Rig manager
CV-7	WORKOVER SPECIALIST (SUPERVISOR, ENGINEER, SUPERINTENDENT) Field Inspector - Responsible for regulation of oil and gas wells in the State of Indiana  - Plugging and MIT supervision. Independent Consultant in the Oil Field.  Have been responsible for overseeing drilling rigs, the completion and workover of wells for several independent oil companies. Cementer, Tester-Tool Operator. Frac Operator - Worked in Rock Springs, Wyoming, Saudi Arabia, Egypt, Brazil,  Africa and Flora, IL in various positions of responsibility.  Supervisor for cementing and frac crews.
CV-8	DRILLING CONSULTANT (SUPERVISOR, SUPERINTENDENT) OILFIELD WORK EXPERIENCE FROM 1970. To secure a position with a progressive company where I can utilize my talents and experience to achieve the company's goals as well as continuing my own professional growth.
CV-10	DIRECTIONAL DRILLER / MWD ENGINEER Experienced MWD Field Engineer, Offshore Engineer, Petroleum Engineer, Drilling Engineer, Bit sales Engineer EXPERIENCED IN: - hot hole over balance drilling with Positive pulsing and some of LWD and Super slim Directional hole with Motor and A.G.S. (Adjustable stabilizer) - drilling the hole with Anti-collision program software for top hole 11 ¾ ” hole , 8 ½” intermediate section and 6 1/8” hole with 180 degree Celsius MWD tool. Some time drill with LWD for SLD, CNT, Gamma, and Phase4 resistivity. - SPERRY-Sun positive pulser
CV-13	MARINE BALLAST CONTROL OPERATOR Marine Engineer with the Royal Fleet Auxiliary and following experience on various ships worldwide, I commenced employment in the oil industry in 1983. My offshore experience includes working as Watchstander, Ballast Control Operator and Assistant Barge Engineer. These positions have also included the duties of Helicopter Landing Officer and Safety Co-ordinator.
CV-16	CEMENTING OPERATOR / FIELD ENGINEER QUALIFICATIONS: - Packer Installation Supervision - Frac Operator - Cementing Unit Operator
CV-18	WORKOVER SPECIALIST (SUPERVISOR, TOOLPUSHER) Rig Manager (Supervisor)/Completions Specialist within a specialized coiled tubing operation (CT Fracturing), and have been involved in many aspects of the industry, having experience in open and cased hole logging, complimented with knowledge and experience in well construction and completion/workover skills from Dowell. Graduate of the Heavy Equipment Mechanics Program at Kelsey Institute in Saskatoon, Saskatchewan and bring a strong mechanical background including knowledge of air, hydraulic, electrical and plc controlled systems and pumps. Over 10 years of oilfield experience operating, maintaining and supervising various pieces of equipment and crews, including coiled tubing units, frac equipment, nitrogen and single and twin cement units.  Knowledge and experience in open and cased hole units and tools as well as downhole tools used in well construction and completions. Knows wellsite calculations for all facets of well stimulation (fracturing and acidizing) and cementing (primary, remedial and plugs). Attended and been part of many industry courses on safety, new technology and general as well as advanced schools for well construction and stimulation.
CV-22	ASSISTANT DRILLER EXPERIENCE FROM 1993 For the last ten years has worked within the drilling industry, gaining a diversity of skills ranging from Drillers Assistant and Roughneck to Derrickman.  Possess a good working knowledge of the drill floor, mud pumps, mud systems and Well Control.  Had been a safety representative on one of rigs and obtained a certificate in Occupational Health and Safety. Had also obtained certificates in IADC Well Control, Offshore Fire Fighting and Breathing Apparatus, Dogging, Gas Testing, HUET, Front-end Loader with Forklift Attachment, H2S Awareness and Use of Breathing Apparatus, and First Aid within the drilling industry. Energetic and hard working person who enjoys a challenge within work environment, by himself or as a team member.  Receptive to new ideas and due to military background, follow instructions easily.  An employer will find him to be punctual, dedicated and discrete.  Able to handle pressure at all times.  Enjoys all areas of the drilling industry and intend to make a working career in the oil fields.
CV-24	MUD LOGGING / MWD ENGINEER EXPERIENCE FROM 1994 * Preparation, checking planning and organization of all surface equipment needed to  run a MWD/LWD   job (land jobs and/or off shore) in which there were included D&I, GR & Res. * Perform the MWD/LWD operations in a safe manner. Teamwork. * Crew handling, Client relationships, as well as reporting to the clients and to company. Communications with the Directional Drillers * Post jobs check (surface equipment and Tools). * While measurements where being taken: depth control, log quality control while drilling assuring enough data density, data management and delivering. Presentation of  field printouts. * Manipulation of vast amounts of data acquired during drilling operations. * Determination of Hydrocarbon bearing reservoirs in teamwork with the Directional Driller, Wellsite Geologist and Company  Representative. * Assure Total Quality in every single job performed
CV-25	DRILLING AND COMPLETION FLUIDS ENGINEER EXPERIENCE FROM 1993 ·Sold and serviced petrochemical products and services to customers ·Ran cost estimates and produced bids for customers. ·Wrote technical procedures for customers regarding the use of petrochemicals for use in completions, well stimulation, clean up and solids control. Then went to location to implement and supervise such procedures including mixing/blending and pumping and routing, as well as disposal and environmental protection. ·Wrote several computer programs, technical papers and manuals dealing with mud to brine displacements, solids control, density control, viscosity, hydrodynamics and thermodynamics. ·Established a loyal and solid customer base.
CV-26	DRILLING SUPERINTENDENT / MANAGER Specializing in start-up of operations in Remote Locations. Drlg/Rig Supt.for SHELL, LASMO, CONOCO, BHP, TRICENTROL, PETRONAS, & SIRTE. Office and/or Field Supervision for Drilling, Testing, Completion, Fishing/Workover and programs for same - Computer Literate - Epidoris, Wellplan, Dims, Excel, Windows, Etc. Expertise in drilling wells in many varied conditions such as:  High pressure, gumbo, hardrock, H2S, massive lost circulation, high angle, multi-lateral horizontal, depleted zones etc. EXPERIENCE FROM 1975. LATEST RESPONSIBILITIES AND SKILLS: •MONITORING AND DIRECTING THE ACTIVITIES OF MULTIPLE RIG OPERATIONS. •DRILLING, WORKOVER AND COMPLETION PROGRAMS. •CONTRACT NEGOTIATION FOR RIGS, MUD, CEMENT ETC. •BUDGET AND AFE PREPARATION. •PERSONNEL SELECTION, SCHEDULING, COUNSELING, ETC. •LIAISING WITH PETROLEUM ENGINEERING, RESERVOIR ENGINEERING, PRODUCTION AND GEOLOGY DEPARTMENTS. •MANAGEMENT PRESENTATIONS. •CONTINGENCY PLANNING - FOR BLOW OUTS, OIL SPILLS, ETC. •NEGOTIATION WITH GOVERNMENT STATE AND LOCAL REGULATORY AND PERMITTING AGENCIES. •EMPLOYEE HOUSING, TRANSPORTATION, COMMUNICATION, HEALTH CARE, VISAS,  WORK AND RESIDENCE PERMITS. •NEGOTIATION WITH CUSTOMS AND IMMIGRATION OFFICIALS. •POLLUTION PREVENTION POLICY AND IMPLEMENTATION. •LOGISTICS - IMPORTATION, WAREHOUSING, AND DISTRIBUTION OF DRILLING TANGIBLES AND CONSUMABLES. •SAFETY POLICY AND IMPLEMENTATION. •SECURITY ARRANGEMENTS WITH POLICE AND MILITARY. •LOCAL EMPLOYEES - SUCCESSFULLY DEALT WITH RACIAL AND ETHNIC DIFFERENCES, LABOUR UNION DISPUTES, VILLAGE UPRISINGS, RIG BLOCKADES, THIEVERY, AND ARMED BANDITS.
CV-29	RIG MANAGER / TOOLPUSHER EXPERIENCE FROM 1984 ·Turnkey Drilling ·Air drilling & cavitating ·Directional  & Horizontal Drilling ·High Pressure Gas Wells ·Tesco Top Drive Experience ·Workover & Completions ·Underbalanced Nitrogen Drilling
CV-30	DRILLING EQUIPMENT SERVICE TECHNICIAN EXPERIENCE FROM 1980 Building, Repairing, and Maintaining Drilling Equipment Professional qualifications include experience as a supervisor for FarmTech General Contractors and a Texas Regional Service Technician for Canrig Drilling Technology. Core Professional Strengths: Class A CDL License Electrical Certificate Hydraulic Certificate Spanish I Certificate Ability to Read Prints, Drawings, and Designs Exceptional Sales Ability Skilled in Fabrication, Fitting, and Welding Problem-Solving Skills
CV-32	WORKOVER AND WELL SERVICES CONSULTANT WORK IN COORDINATION  WITH ENGINGEERS IN THE PLANNING AND BUDGETING OF MAJOR OFFSHORE OPERATIONS. OVERSEE ALL, ON LOCATION PROJECTS INCLUDING BUT NOT LIMITED TO  DRILLING WORKOVER, FISHING, LARGE OFFSHORE FRACS , WIRELINE, COILTUBING, SNUBBING , COMPLETIONS,PLUG AND ABANDON OPERATIONS. OVERSAW MULTI-SIMULTANEOUS  COILTUBING, SNUBBING AND WIRELINE  OPERATIONS ON ONE PLATFORM AS A DAY TO  DAY ROUTINE OPERATION. CONSULTANT AND ADVISOR TO COMPANIES DOING START UP PROJECTS IN THE FORMER SOVIET UNION.ADVISOR TO COMPANIES DOING BUSINESS WITH NATIVE AMERICAN TRIBES.
CV-33	ROTATING EQUIPMENT SPECIALIST / ENGINEER 20 plus years experience working with various types of Rotating Equipment at World Wide locations. This experience includes nine years working as a Product Support Engineer and Field Service Representative for Dresser-Rand a world renown Rotating Equipment OEM with numerous equipment installations throughout Asia. Competent with setting Equipment Skids, Grouting, Alignments, Start-Ups, Disassembly Inspections and Failure Evaluations, and with Engineering Training, skilled in interpolating Technical Documentation and Vendor Manuals. Has an excellent rapport with fellow workers and work well under pressure. Has a clean and excellent accident free work history. A quick learner and prepared to undergo any courses or training which will further present experience.